Subaru Forester: Position light - Replacing bulbs - Maintenance and service - Subaru Forester Owner's ManualSubaru Forester: Position light

1. Turn the bulb socket counterclockwise

1. Turn the bulb socket counterclockwise and pull out the socket.

2. Pull the bulb out of the socket.

3. Install a new bulb.

4. Install the bulb socket by turning it clockwise.

    High beam light bulbs
    Right-hand side 1. Use a screwdriver to undo the clips on the air intake duct, then remove the air intake duct (right-hand side). 2. Disconnect the electrical connector from the bulb. 3 ...

    Front turn signal light
    It may be difficult to replace the bulbs. Have the bulbs replaced by your SUBARU dealer if necessary. ...

    See also:

    Before towing
    The following may indicate a problem with your transmission. Contact your Toyota dealer before towing. ● The engine is running, but the vehicle will not move. ● The vehicle makes an a ...

    Fastening a seat belt
    Buckling Pull the belt out far enough to insert the latch plate into the receptacle until a distinct click is heard. The seat belt retractor is normally "unlocked" and you can move fr ...

    Speedometer
    Speedometer The speedometer indicates vehicle speed in miles per hour (MPH) or kilometers per hour (km/h). ...