Jeep Liberty: Illuminated Entry - Things To Know Before Starting Your Vehicle - Jeep Liberty Owner's ManualJeep Liberty: Illuminated Entry

The courtesy lights will turn on when you use the Remote Keyless Entry (RKE) transmitter to unlock the doors or open any door.

This feature also turns on the approach lighting in the outside mirrors (if equipped). Refer to “Mirrors” in “Understanding The Features Of Your Vehicle” for further information.

The lights will fade to off after approximately 30 seconds or they will immediately fade to off once the ignition switch is turned to ON/RUN from the OFF position.

NOTE:
• The front courtesy overhead console and door courtesy lights do not turn on if the dimmer control is in the Dome ON position (extreme top position).

• The Illuminated Entry system will not operate if the dimmer control is in the “Dome defeat” position (extreme bottom position).

    To Disarm The System
    Either press the UNLOCK button on the RKE transmitter or insert a valid Sentry Key into the ignition lock cylinder and turn the key to the ON/RUN position. NOTE: • Unlocking the doors with th ...

    Remote Keyless Entry (RKE)
    This system allows you to lock or unlock the doors and liftgate, open the liftgate flip-up window, or activate the PANIC alarm from distances up to approximately 66 ft (20 m) using a hand-held R ...

    See also:

    Hazard Warning Flashers
    The Hazard Warning flasher switch is located in the switch bank below the climate controls. Press the switch to turn on the Hazard Warning flasher. When the switch is activated, all directional ...

    Maximum trailer loads
    Never allow the total trailer load to exceed the value specified in the “Towing Load/Specification” chart. The total trailer load equals trailer weight plus its cargo weight. - When towing ...

    Instrument panel features
    1 — Air Outlet 6 — Glove Compartment 11 — Hazard Warning Flasher 2 — Instrument Cluster 7 — Climate Control 12 — Electronic Stability Program / Traction Control Switch * ...