Volvo XC60: High beam flash
Move the lever toward the steering wheel to position 1. The high beams come on until the lever is released.
High/low beam headlights
Headlight switch and lever 1 High beam flash 2 Toggle between high and low beams ...High/low beam headlights
Continuous high beams 1. Set the ignition to mode II. 2. With the light switch in position 0 or , pull the turn signal lever toward the steering wheel to position 2 to toggle between high an ...See also:
hazard warning lamps
Hazard warning lamps
Press to turn the hazard warning lamps on.
Press again to turn off. When the hazard
warning lamps are operating, the direction
indicator warning lamps will flash in time wit ...
Tyre care
Do not drive the vehicle if a
tyre is
damaged, excessively worn, or
incorrectly inflated.
Avoid contaminating the tyres with
vehicle fluids as they may cause
damage to the tyre.
Avoid spinnin ...
Erasing the Car2U Home Automation System buttons
Note: The system allows for three devices to be programmed. If you
need to change or replace any of the three devices after it has been
initially programmed, it will be necessary to erase the curren ...