Subaru Forester: Entering the vehicle following remote engine start
shutdown
An alarm trigger may occur if the vehicle is opened by the remote keyless entry transmitter within a few seconds immediately following remote engine start shutdown.
Entering the vehicle while it is running via remote
start
1. Unlock the vehicle doors using the
keyless entry system. If the vehicle’s
doors are unlocked manually using the
key, the vehicle’s alarm system will trigger
and the remote engine start ...
Pre-heating or pre-cooling the interior of the
vehicle
Before exiting the vehicle, set the temperature
controls to the desired setting
and operation. After the system starts the
vehicle, the heater or air-conditioning will
activate and heat or coo ...
See also:
Checking the fluid level when the fluid is hot
1. Drive the vehicle several miles to raise
the temperature of the transmission fluid
up to normal operating temperature; 158
to 1768F (70 to 808C) is normal.
2. Park the vehicle on a level sur ...
Turn signals
1. Remove the headlight housing from the
vehicle (see page 322).
2. Remove the bulb holder by turning it counterclockwise
and pulling it out of the headlight
housing.
3. Pull out the holder ...
Information displays
Information displays in the instrument panel
The information displays show information on
some of the vehicle's functions, such as cruise
control, the trip computer and messages. The
informat ...
