Volvo XC60: Engine and cooling system
Under special conditions, for example when driving in hilly terrain, extreme heat or with heavy loads, there is a risk that the engine and cooling system will overheat. Proceed as follows to avoid overheating the engine.
• Maintain a low speed when driving with a trailer up long, steep hills.
• Do not turn the engine off immediately when stopping after a hard drive.
WARNING
The cooling fan may start or continue to
operate (for up to 6 minutes) after the engine
has been switched off.
• Remove any auxiliary lights from in front of the grille when driving in hot weather conditions.
• Do not exceed engine speeds of 4500 rpm if driving with a trailer in hilly terrain. The oil temperature could become too high.
Driving through water
• The vehicle can be driven through water up to a depth of approximately 10 in. (25 cm), at a maximum speed of 6 mph (10 km/h). • Take particular care when driving through flowing water. â ...Conserving electrical current
Keep the following in mind to help minimize battery drain: • When the engine is not running, avoid using ignition mode II. Many electrical systems (the audio system, the optional navigation ...See also:
ON position
When the switch is in the ON position 1 , the
map lights will illuminate. ...
Enhanced Seat Belt Use Reminder System (BeltAlert )
BeltAlert is a feature intended to remind the driver and
front passenger (if equipped with front passenger
BeltAlert ) to fasten their seat belts. The feature is active
whenever the ignition is ...
Continuously Variable Transmission (CVT) position
indicator
The Continuously Variable Transmission (CVT)
position indicator indicates the selector lever
position when the ignition switch is in the ON
position. ...