Volvo XC60: Conserving electrical current
Keep the following in mind to help minimize battery drain:
• When the engine is not running, avoid using ignition mode II. Many electrical systems (the audio system, the optional navigation system, power windows, etc) will function in ignition modes 0 and I. These modes reduce drain on the battery.
• Please keep in mind that using systems, accessories, etc., that consume a great deal of current when the engine is not running could result in the battery being completely drained. Driving or having the engine running for approximately 15 minutes will help keep the battery charged.
• The optional 12 volt socket in the cargo area provides electrical current even with the ignition switched off, which drains the battery.
Engine and cooling system
Under special conditions, for example when
driving in hilly terrain, extreme heat or with
heavy loads, there is a risk that the engine and
cooling system will overheat. Proceed as follows
to a ...
Before a long distance trip
It is always worthwhile to have your vehicle
checked by a trained and qualified Volvo service
technician before driving long distances.
Your retailer will also be able to supply you with
bulbs, ...
See also:
Infotainment Control Buttons
The buttons on the faceplate are used to start primary functions while using
the infotainment system.
VOL/ (Volume/Power):
1. Press to turn the system on and off.
2. Turn to adjust the volume.
...
Opening
Switch off the engine.
emove the SmartKey from the ignition lock.
KEYLESS-GO: open the driver’s door. This switches the ignition to position 0,
which corresponds to having removed the Smar ...
Activating RSE
The RSE system can be activated using controls
on the front or rear screens.
From the front seat, press MEDIA (see the following
illustration) and select RSE.
From the rear seat, press the scree ...
