Ford Escape: Clear MyKey
To reset all MyKeys as admin keys do the following:
1. Turn the vehicle on using the admin key.
2. Press SETUP until PRESS RESET TO CLEAR MYKEY is displayed.
3. Press and release the RESET button. HOLD RESET TO CONFIRM
CLEAR is displayed.
4. Press and hold the RESET button for two seconds until ALL MYKEYS
CLEARED is displayed.
Programming MyKey Optional Settings
Turn the ignition on using an admin key. To program the optional
settings, use the message center buttons to do the following:
1. Press SETUP until RESET FOR MYKEY SETTINGS is displayed.
2. Press ...
Check MyKey System Status
The vehicle’s message center system check will provide the status of the
following MyKey parameters:
• MYKEY MILES — This odometer only tracks mileage when a MyKey
is used. If mileage does ...
See also:
Seek tuning (SEEK)
Type A and B audio:
Type C audio:
Type D audio:
If you press the “” or “”
button briefly,
the radio will automatically search for a
receivable station and stop at the first one ...
Overview
1 Screen: channel A (left), channel B (right)
2 Headphone socket
3 On/Off button
4 A/V-AUX socket
5 Remote control
6 Headphones
7 IR transceiver ...
Stopping the vehicle
1. Safely move the vehicle off the road and
away from traffic.
2. Turn on the hazard warning flashers.
3. Park on a level surface and apply the parking
brake. Move the selector lever to the P
...
