Nissan Rogue: Stopping the vehicle
1. Safely move the vehicle off the road and away from traffic.
2. Turn on the hazard warning flashers.
3. Park on a level surface and apply the parking brake. Move the selector lever to the P (Park) position.
4. Turn off the engine.
5. Raise the hood to warn other traffic, and to signal professional road assistance personnel that you need assistance.
6. Have all passengers get out of the vehicle and stand in a safe place, away from traffic and clear of the vehicle.
- Make sure the parking brake is securely applied and the transmission is shifted into the P (Park) position.
- Never change tires when the vehicle is on a slope, ice or slippery areas.
This is hazardous.
- Never change tires if oncoming traffic is close to your vehicle. Wait for professional road assistance.
Changing a flat tire
If you have a flat tire, follow the instructions below. ...Blocking wheels
Place suitable blocks 1 at both the front and back of the wheel diagonally opposite the flat tire to prevent the vehicle from moving when it is jacked up. Be sure to block the wheel as th ...See also:
Interior Air Quality System (IAQS)
A multifilter helps reduce gases and particles
in the incoming air, thereby reducing the levels
of odors and contaminants entering the vehicle.
The air quality sensor detects increased
levels o ...
Seatbelt maintenance
To clean the seatbelts, use a mild soap
and lukewarm water. Never bleach or dye
the belts because this could seriously
affect their strength.
Inspect the seatbelts and attachments
including t ...
Confirmation when locking/unlocking the vehicle
Settings can be made in the menu system for
audible and visual confirmation when the vehicle
has been locked or unlocked. With these
functions activated, the following will occur
when the vehi ...