Mercedes-Benz GLK-Class: Storing and maintaining the current speed
You can store the current speed if you are driving faster than 20 mph (30 km/h).
- Accelerate the vehicle to the desired speed.
- Briefly press the cruise control lever up 1 or down 2.
- Remove your foot from the accelerator pedal.
Cruise control is activated. The vehicle automatically maintains the speed.
Cruise control may be unable to maintain the stored speed on uphill gradients. The stored speed is resumed when the gradient evens out. Cruise control maintains the stored speed on downhill gradients by automatically applying the brakes.
Cruise control lever
To switch on or to increase the speed To switch on or to reduce the speed To deactivate cruise control To switch on with the current speed or with the last stored speed When you activate ...Storing the current speed or calling up the last stored speed
WARNING The set speed stored in memory should only be set again if prevailing road conditions and legal speed limits permit. Possible acceleration or deceleration differences arising from re ...See also:
Recirculation
- Press briefly to activate timed
recirculation. The button indicator
illuminates when recirculation is on.
- Press and hold the button to activate
latched recirculation. The button indicator
wil ...
Safety chains
Always use a suitable chain between your
vehicle and the trailer. The safety chains should
be crossed and should be attached to the hitch,
not to the vehicle bumper or axle. The safety
chains ...
Warnings and indicators
Warning lights / audible indicators Checking operation All warning lights are
checked by turning the ignition switch ON (do not start the engine). Any light that
does not illuminate should be chec ...