GMC Terrain: Leaving After Parking on a Hill - Driving Characteristics and Towing Tips - Towing - Driving and Operating - GMC Terrain Owner's ManualGMC Terrain: Leaving After Parking on a Hill

1. Apply and hold the brake pedal.
2. Start the engine.
3. Shift into a gear.
4. Release the parking brake.
5. Let up on the brake pedal.
6. Drive slowly until the trailer is clear of the chocks.
7. Stop and have someone pick up and store the chocks.

    Parking on Hills
    WARNING Parking the vehicle on a hill with the trailer attached can be dangerous. If something goes wrong, the rig could start to move. People can be injured, and both the vehicle and the trailer ...

    Maintenance When Trailer Towing
    The vehicle needs service more often when pulling a trailer. See this manual's Maintenance Schedule or Index for more information. Things that are especially important in trailer operation are ...

    See also:

    Audible/visual alarm signal
    • An audible alarm signal is given by a battery powered siren. The alarm cycle lasts for 30 seconds. • The visual alarm signal is given by flashing all turn signals for approximately 5 minu ...

    Dynamic stability control (amber)
    Dynamic stability control (amber) Illuminates briefly when the ignition is switched on and extinguishes when the engine is started. If the lamp flashes while driving, the DSC system is active. ...

    Transfer Case Position Indicator Lights
    The four-wheel drive indicator lights (4WD and 4 LOW) are located in the instrument cluster. The NEUTRAL indicator light is located on the transfer case switch. If there is no indicator light on ...