Subaru Forester: Rear window wiper blade rubber
1. Pull out the end of the blade rubber assembly to unlock it from the plastic support.
2. Pull the blade rubber assembly out of the plastic support.
1) Metal spines
3. If the new blade rubber is not provided with two metal spines, remove the metal spines from the old blade rubber and install them in the new blade rubber.
4. Align the claws of the plastic support with the grooves in the blade rubber assembly, then slide the blade rubber assembly into place.
Securely retain both ends of the rubber with the stoppers on the plastic support ends. If the rubber is not retained properly, the wiper may scratch the rear window glass.
Rear window wiper blade assembly
1. Raise the wiper arm off the rear window. 2. Turn the wiper blade assembly counterclockwise. 3. Pull the wiper blade assembly toward you to remove it from the wiper arm. 4. Install the wi ...Battery
- Before beginning work on or near any battery, be sure to extinguish all cigarettes, matches, and lighters. Never expose a battery to an open flame or electric sparks. Batteries give off ...See also:
When CD is in the player (type A)
When the button is pressed, the
player will start playback. ...
Playing a PC card (EX-L model with navigation system)
Playing a PC card (EX-L model with navigation system) ...
Defrosting or defogging
Defrosting or defogging
To direct warm air to the windshield and
front door windows:
1. Set the airflow control dial to the “”
position.
2. Set the temperature control dial to the
red ...