Subaru Forester: Rear window wiper blade assembly - Replacement of wiper blades - Maintenance and service - Subaru Forester Owner's ManualSubaru Forester: Rear window wiper blade assembly

1. Raise the wiper arm off the rear window.

2. Turn the wiper blade assembly counterclockwise.

2. Turn the wiper blade assembly counterclockwise.

3. Pull the wiper blade assembly toward

3. Pull the wiper blade assembly toward you to remove it from the wiper arm.

4. Install the wiper blade assembly to the wiper arm. Make sure that it locks in place.

5. Hold the wiper arm by hand and slowly lower it in position.

    Windshield wiper blade rubber
    1) Support 1. Grasp the locked end of the blade rubber assembly and pull it firmly until the stoppers on the rubber are free of the support. 1) Metal spines 2. If the new blade rubber is ...

    Rear window wiper blade rubber
    1. Pull out the end of the blade rubber assembly to unlock it from the plastic support. 2. Pull the blade rubber assembly out of the plastic support. 1) Metal spines 3. If the new blade ...

    See also:

    Activation
    PAC is activated when the gear selector is moved to R if the system is selected in the MY CAR menu system or by pressing the CAM button in the center console. See page 133 for a description ...

    Quick poi selection
    Touch the Map screen to display the POI button. Touch the POI (Point of interest) button. The screen shows six suggested categories, five of which can be selected as quick points of interest. Not ...

    Optional settings – these settings can be changed
    • Vehicle speed is limited to 80 mph (130 km/h). Visual warnings are displayed followed by a chime when the vehicle speed has reached 80 mph (130 km/h). • Visual warnings are displayed followed ...