Volvo XC60: Putting ACC in standby mode - Operation - Adaptive Cruise Control (ACC) - Comfort and driving pleasure - Volvo XC60 Owner's ManualVolvo XC60: Putting ACC in standby mode

Before ACC can be used to regulate speed and/or the distance to a vehicle ahead, it must first be put in standby mode.

To do so:

Press The symbol appears in the display.

The and symbol appears in the display and parentheses (---) indicate that ACC is in standby mode.

NOTE
The driver's door must be closed and the driver's seat belt must be fastened before ACC can be put in active mode. If the driver's seat belt is taken off or if the driver's door is opened, ACC will return to standby mode.

    Operation
    Controls and display 1 Resume previous settings, increase speed (each additional press increases speed by 1 mph (approximately 2 km/h). 2 Standby mode on/off 3 Set time interval 4 Put in activ ...

    Setting a speed
    Once ACC has been put in standby mode, use the or buttons to store (set) the vehicle's current speed. This puts the system in active mode. The set speed, for example 55 mph, is shown in th ...

    See also:

    Examples of the types of accidents in which deployment of the driver’s/driver’s and front passenger’s SRS frontal airbag(s) is unlikely to occur.
    1) The vehicle strikes an object, such as a telephone pole or sign pole. 2) The vehicle slides under the load bed of a truck. 3) The vehicle sustains an oblique offset frontal impact. 4) Th ...

    Pairing and connecting a bluetooth® media device
    For further information on Bluetooth® and device compatibility, see 141, BLUETOOTH® INFORMATION. Using your media device Note: The process of pairing and connecting your media device with the v ...

    Rear seat center table (if equipped)
    To use the rear seat center table, pull the strap up. The rear seat center table can be used as a storage space and as rear passenger’s cup holders. - Do not step or sit on the r ...