Subaru Forester: Position light - Replacing bulbs - Maintenance and service - Subaru Forester Owner's ManualSubaru Forester: Position light

1. Turn the bulb socket counterclockwise

1. Turn the bulb socket counterclockwise and pull out the socket.

2. Pull the bulb out of the socket.

3. Install a new bulb.

4. Install the bulb socket by turning it clockwise.

    High beam light bulbs
    Right-hand side 1. Use a screwdriver to undo the clips on the air intake duct, then remove the air intake duct (right-hand side). 2. Disconnect the electrical connector from the bulb. 3 ...

    Front turn signal light
    It may be difficult to replace the bulbs. Have the bulbs replaced by your SUBARU dealer if necessary. ...

    See also:

    Methanol
    Wherever possible avoid using fuel containing methanol. Some fuels contain methanol (Methyl or wood alcohol). If you use fuels containing methanol the fuels must also contain co-solvents and c ...

    Seat belt (red)
    Seat belt (red) Illuminates when the ignition is on and an occupied front seat belt is unbuckled. The lamp will extinguish after sixty seconds or when the relevant seat belt(s) is buckled. In s ...

    QR25DE engine
    1. Engine oil filler cap 2. Brake fluid reservoir 3. Air cleaner 4. Engine coolant reservoir 5. Window washer fluid reservoir 6. Drive belt location 7. Engine oil dipstick 8. Radiator ...