Nissan Rogue: Map lights
Map lights
Push the light lens to turn the map light on or off.
The map light control switch has three positions:
ON 1 , DOOR 2 and OFF 3 .
The light 4 (if so equipped) will illuminate when the headlight switch is turned to the or position.
Interior lights
Do not use for extended periods of time with the engine stopped. This could result in a discharged battery. ...ON position
When the switch is in the ON position 1 , the map lights will illuminate. ...See also:
Panel dimmer control
Use to adjust the brightness of the
instrument panel and all applicable
switches in the vehicle during
headlamp and parking lamp
operation.
• Move the control to the full
upright position, p ...
Capacity and distribution
Cargo capacity depends on the total weight of the occupants.
(Cargo capacity) = (Total load capacity) - (Total weight of occupants)
Steps for Determining Correct Load Limit⎯
(1)Locate the sta ...
Underbody maintenance
Regularly flush the underbody with plain water,
and pay particular attention to areas where
mud and debris collect.
If damage or corrosion are detected, have the
vehicle checked by your Dealer/Aut ...