Subaru Forester: Defroster button
Defroster button
To defrost or dehumidify the windshield
and front door windows, press the defroster
button “
”. When the “”
button is
pressed, the indicator light on the button
illuminates and the following operation is
performed.
- The outside air is drawn into the passenger compartment and the airflow is directed towards the windshield and the front door windows.
- The air conditioner compressor automatically operates to quickly defog the windshield.
After eliminating the fogging from the windshield, return the climate control system to the FULL AUTO mode by pressing the “AUTO” button or turn off by pressing the “OFF” button.
Alternatively, press the “” button
again
to return the system to the setting that was
selected before you activated the defroster.
DUAL mode
DUAL mode
It is possible to make separate temperature
settings for the driver’s side and
passenger’s side (DUAL mode).
To activate the DUAL mode:
Press the “DUAL” button. When the DUA ...
Fan speed control button
Fan speed control button
The fan speed control button has 7
different fan speed positions.
The fan speed is shown by the display. ...
See also:
Owner maintenance
Any significant or sudden
drop in fluid
levels, or uneven tyre wear, should be
reported to a qualified technician
without delay.
In addition to the routine maintenance, a
number of simple chec ...
Stage 2: Checking inflation pressure
1. Connect the tire sealing system as described
in stage 1.
2. Refer to the inflation pressure table in this
chapter for the correct inflation pressure. If
the tire needs to be inflated, start ...
Chemical Paint Spotting
Airborne pollutants can fall upon and attack painted vehicle surfaces causing
blotchy, ring-shaped discolorations, and small, irregular dark spots etched into
the paint surface. ...
