Volvo XC60: Stage 2: Checking inflation pressure - Tire sealing system–temporarily repairing a flat tire - Tire Sealing System - Wheels and tires - Volvo XC60 Owner's ManualVolvo XC60: Stage 2: Checking inflation pressure

1. Connect the tire sealing system as described in stage 1.

2. Refer to the inflation pressure table in this chapter for the correct inflation pressure. If the tire needs to be inflated, start the tire sealing system’s compressor. If necessary, release air from the tire by turning the air release knob counterclockwise.

CAUTION The compressor should not be used for more than 10 minutes at a time to avoid overheating.

WARNING
If you interrupt your trip for more than 1 hour, check the inflation pressure in the damaged tire again before continuing.

    Stage 1: Sealing the hole
    1. Open the cover on the tire sealing kit. 2. Peel off the speed limit sticker and affix it to the steering wheel hub where it will be clearly visible to the driver. 3. Ensure that the on/off sw ...

    Replacing the sealing compound container
    The sealing compound container must be replaced if: • the tire sealing system has been used to repair a tire. • the container’s expiration date has passed (see the date on decal). NOTE ...

    See also:

    Coin tray
    Coin tray A coin tray is built in the center console. ...

    Double trip meter
    Type A Type B The trip meter shows the distance that the vehicle has been driven since you last set it to zero. To set the trip meter to zero, select the A trip or B trip meter by pus ...

    Measuring and adjusting air pressure to achieve proper inflation
    Check and, if necessary, adjust the pressure of each tire (including the spare) at least once a month and before any long journey. Check the tire pressures when the tires are cold. Use a pre ...