Volvo XC60: Cleaning the sensors - Park assist - Comfort and driving pleasure - Volvo XC60 Owner's ManualVolvo XC60: Cleaning the sensors

Location of the front sensors
Location of the front sensors

Location of the rear sensors
Location of the rear sensors

The sensors must be cleaned regularly to ensure that they work properly. Clean them with water and a suitable car washing detergent.

Ice and snow covering the sensors may cause incorrect warning signals.

NOTE
If the sensors are obstructed by e.g., dirt, snow, or ice, this could result in false warning signals from the park assist system.

    Faults in the system
    If the information symbol illuminates and Park assist syst Service required is shown on the information display, this indicates that the system is not functioning properly and has been disenga ...

    See also:

    Using Operator Mode
    If the Sky Sliderâ„¢ is open from the front, press the switch forward and hold it, the Sky Sliderâ„¢ will move forward. Release the switch to stop the Sky Sliderâ„¢ travel at any point. If the S ...

    Screen
    - Screensaver: Select to change the screensaver. Touch an option to select. - Screen animations: Select to turn animated transitions between screens on or off. Note: While screen animations are o ...

    Definition of terms for tires and loading
    Tire ply composition and material used Describes the number of plies or the number of layers of rubber-coated fabric in the tire tread and sidewall. These are made of steel, nylon, polyester and ot ...