Jeep Liberty: Using Operator Mode
If the Sky Sliderâ„¢ is open from the front, press the switch forward and hold it, the Sky Sliderâ„¢ will move forward.
Release the switch to stop the Sky Sliderâ„¢ travel at any point.
If the Sky Sliderâ„¢ is open from the rear, press the switch rearward and hold it and the Sky Sliderâ„¢ will move rearward. Release the switch to stop the Sky Sliderâ„¢ travel at any point.
Using Automatic Mode
Press and release the button in the center of the switch and the Sky Sliderâ„¢ will close automatically from any position. ...Manual Override
The Sky Sliderâ„¢ drive motors are mounted to the roof above the cargo lamp. In the event that your vehicle losses battery power, you can close the Sky Sliderâ„¢ by turning the drive gears in th ...See also:
Engine Coolant
Adding Engine Coolant
If the coolant level in the reserve
tank is at or below the MIN line, add
coolant to bring it up to the MAX line.
Inspect the cooling system for leaks.
Always use Honda ...
Double trip meter
Type A
Type B
The trip meter shows the distance that the
vehicle has been driven since you last set
it to zero.
To set the trip meter to zero, select the A
trip or B trip meter by pus ...
Average Fuel Economy
Shows the average fuel economy since the last reset.
Average Fuel Economy can be reset by pressing and
holding the SELECT button (as prompted in the EVIC
display). Upon reset, the history informa ...