Jeep Liberty: Using Automatic Mode
Press the switch rearward and release it within one-half second and the Sky Sliderâ„¢ will open from the front and move automatically toward the rear of the vehicle.
Press the switch forward and release it within one-half second and the Sky Sliderâ„¢ will open from the rear and move automatically toward the front of the vehicle.
NOTE:
• During operation, any movement of the Sky Slider™
switch will stop the Sky Sliderâ„¢ roof.
• To resume the operation from a partially open position, press and release the switch a second time.
• The Sky Slider™ will not open from the front and the rear at the same time. The Sky Slider™ must close fully before opening it from the opposite end.
Using Operator Mode
Press the switch rearward and hold it, the Sky Sliderâ„¢ will open from the front and move toward the rear of the vehicle. Press the switch forward and hold it, the Sky Sliderâ„¢ will open from ...See also:
Garage door transceiver
Do not use the transceiver
with any
garage door opener that lacks the
safety stop and reverse feature as
required by safety standards.
When programming the transceiver to
a garage door opener ...
Daytime running lamps
Daytime running lamps are LED lamps.
With the lighting control in the OFF position or
in AUTO position while lighting conditions do
not require headlamps on, then daytime
running lamps will switch ...
Pairing
A Bluetooth&-enabled cell phone must be paired to the Bluetooth system and then
connected to the vehicle before it can be used. See your cell phone manufacturer's
user guide for Bluetooth ...