Toyota RAV4: Turn signal lever
1 Right turn
2 Left turn
3 Move and hold the lever
partway to signal a lane
change.
The right hand signal will flash
until you release the lever.
4 Move and hold the lever
partway to signal a lane
change.
The left hand signal will flash
until you release the lever.
■Turn signals can be operated when
Vehicles without smart key system
The engine switch is in the “ON” position
Vehicles with smart key system
The “ENGINE START STOP” switch is in IGNITION ON mode.
■If the indicators flash faster than usual
Check that a light bulb in the front or rear turn signal lights has not burned out.
Automatic transmission
Select a shift position appropriate for the driving conditions.
■ Shifting the shift lever
4-speed models
5-speed models
Vehicles without smart key system:
While the engine switch is ...
Parking brake
1 Sets the parking brake
Fully apply the parking brake while depressing the brake pedal.
2 Releases the parking brake
Slightly raise the lever and lower it completely while pressing the button. ...
See also:
Calibration
The compass may need to be calibrated if, for
example, the vehicle is driven into a new magnetic
zone. The character C is shown in the
mirror's display if calibration is necessary.
1. Stop the ...
SUBARU advanced frontal airbag system
Your vehicle is equipped with a SUBARU
advanced frontal airbag system that complies
with the new advanced frontal airbag
requirements in the amended Federal
Motor Vehicle Safety Standard (FMVS ...
If your vehicle overheats
If your engine overheats:
1 Stop the vehicle in a safe place and turn off the air conditioning
system.
2 Check to see if steam is coming out from under the hood.
If you see steam:
Stop the engine ...
