Volvo XC60: Side marker lights - Replacing bulbs - Maintenance and specifications - Volvo XC60 Owner's ManualVolvo XC60: Side marker lights

NOTE
Before starting to replace a bulb, see page 322.

1. Remove the headlight housing from the

1. Remove the headlight housing from the vehicle (see page 322).

2. Remove the bulb holder by turning it counterclockwise and pulling it out of the headlight housing.

3. Pull out the burned out bulb and install a new one. It can only be inserted in one position.

4. Reinsert the bulb holder into the headlight housing and turn it clockwise.

5. Reinstall the headlight housing.

    Turn signals
    1. Remove the headlight housing from the vehicle (see page 322). 2. Remove the bulb holder by turning it counterclockwise and pulling it out of the headlight housing. 3. Pull out the holder ...

    Rear fog light
    The rear fog light (located on the driver's side of the vehicle) can be reached from behind the bumper 1. Remove the bulb holder by turning it counterclockwise. 2. Remove the burned out bulb ...

    See also:

    Engine Air Cleaner/Filter
    See Engine Compartment Overview on page 10‑6 for the location of the engine air cleaner/filter. ...

    Maintenance tools
    Your vehicle is equipped with the following maintenance tools: - Jack - Jack handle - Screwdriver - Towing hook (eye bolt) - Wheel nut wrench - Hex-head wrench (only models with moonroof ...

    Making adjustments in 1 mph (Canada: 1 km/h) increments
    Briefly press the cruise control lever to the pressure point, up 1 for a higher speed or down 2 for a lower speed. The last speed stored is increased or reduced. ...