Mercedes-Benz GLK-Class: Replacing the windshield wiper blades - Replacing the wiper blades - Windshield wipers - Lights and windshield wipers - Mercedes-Benz GLK-Class Owner's ManualMercedes-Benz GLK-Class: Replacing the windshield wiper blades

Removing the wiper blades

using the combination switch. There is otherwise a risk of damaging the hood. Before changing the wiper blades, always set the wiper arms to a vertical position using the combination switch. There is otherwise a risk of damaging the hood.

Moving the wiper blades to a vertical position

Vehicles without KEYLESS-GO

  • Turn the SmartKey to position 1 or 2 in the ignition lock.
  • Set the windshield wipers to position When the wiper arms have reached a vertical position, turn the SmartKey.
  • When the wiper arms have reached a vertical position, turn the SmartKey to position 0 and remove it from the ignition lock.

Vehicles with KEYLESS-GO

  • Switch off the engine.
  • Remove your foot from the brake pedal.
  • Set the windshield wipers to position Press the Start/Stop button repeatedly until the windshield wipers start..
  • Press the Start/Stop button repeatedly until the windshield wipers start.
  • When the wiper arms have reached a vertical position, press the Start/Stop button.

Removing the wiper blades

  • Fold the wiper arm away from the windshield until it engages.
  • Set the wiper blade at right angles to the wiper arm.

  • Remove the wiper blade from the retaining pin on the wiper arm in the direction of the arrow.

Installing the wiper blades

  • Push the new wiper blade onto the retaining pin on the wiper arm in the opposite direction to the arrow. Make sure that the wiper blade slides fully onto the retaining pin on the wiper arm.
  • Turn the wiper blade parallel to the wiper arm.
  • Fold the wiper arm back onto the windshield.
    Important safety notes
    WARNING For safety reasons, switch off the windshield wipers and remove the key from the ignition lock before changing the wiper blades (vehicles with KEYLESS-GO: make sure that the on-board ...

    Replacing the rear window wiper blade
    Removing the wiper blade Remove the SmartKey from the ignition lock. Fold wiper arm 1 away from the rear window until it engages. Position wiper blade 2 at a right angle to wiper arm 1. Ho ...

    See also:

    Exhaust Gas
    WARNING! Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. To avoid brea ...

    Symbols and messages in the main instrument panel
    WARNING The stability system is intended to help improve driving safety. It supplements, but can never replace, the driver's judgment and responsibility when operating the vehicle. Speed and ...

    Fusible links
    The fusible links will melt to prevent a fire if a large current attempts to flow through certain electrical systems. In case of a melted fuse link, we recommend you to have your vehicle inspected ...