Mitsubishi Outlander: Fusible links
The fusible links will melt to prevent a fire if a large current attempts to flow through certain electrical systems. In case of a melted fuse link, we recommend you to have your vehicle inspected. For the fusible links, please refer to “Fuse load capacity” on page 8-29.
WARNING:
● Fusible links must not be replaced by any other device. Failing to fit the correct
fusible link may result in fire in the vehicle, property destruction and serious
or fatal injuries at any time.
For cold and snow weather
Ventilation slots
The ventilation slots in front of the windscreen should be brushed clear after
heavy snowfall so that the operation of the heating and ventilation systems will
not be impaired.
...
Fuses
Fuse block location
To prevent damage to the electrical system due to shortcircuiting or overloading,
each individual circuit is provided with a fuse. There are fuse blocks in the passenger
compa ...
See also:
Important Safety Precautions
You’ll find many safety
recommendations throughout this
section, and throughout this manual.
The recommendations on this page
are the ones we consider to be the
most important. ...
Parking in cold weather
Do not use the parking brake when
parking for long periods in cold weather
since it could freeze in that position.
Instead, observe the following.
1. Place the shift lever in the “1” or “R ...
Indicator lights
All-Wheel Drive (AWD) LOCK indicator light (AWD model)
This light illuminates when the ignition switch is
turned to the ON position, and turns off within 1
second.
When selecting the LOCK mode ...
