GMC Terrain: License Plate Lamp
To replace one of these bulbs:
1. Open the liftgate partway. See Liftgate on page 2‑9.
Passenger Side Shown, Driver Side Similar
2. Push the left end of the lamp assembly toward the right.
3. Pull the lamp assembly down to remove it from the liftgate.
A. Bulb Socket
B. Bulb
C. Lamp Assembly
4. Turn the bulb socket (A) counterclockwise to remove it from the lamp assembly (C).
5. Pull the bulb (B) straight out of the bulb socket.
6. Push the replacement bulb straight into the bulb socket and turn the bulb socket clockwise to install into lamp assembly.
7. Turn the lamp assembly into the liftgate engaging the clip side first.
8. Push on the lamp side opposite the clip until the lamp assembly snaps into place.
Back–Up Lamp
Removal of the lamp assembly is not required to replace the back-up lamp bulb. To replace one of these lamps: 1. Open the liftgate. See Liftgate on page 2‑9. 2. Remove the interior trim acces ...Replacement Bulbs
For replacement bulbs not listed here, contact your dealer. ...See also:
Loading a trailer
When loading the trailer, make sure that neither the permissible gross
weight of the trailer nor the gross vehicle weight are exceeded. The permissible
gross vehicle weight is indicated on th ...
Drive (D)
D is the normal driving position. The car automatically
shifts between the various forward
gears, based on the level of acceleration and
speed. The car must be at a standstill when
shifting fr ...
Storing preset stations
Ten preset stations can be stored for each
waveband (AM, FM1, etc.).
Stored preset stations are selected using the
number key buttons on the center console.
Manually storing preset stations
1. ...