Nissan Rogue: Instrument brightness control - Meters and gauges - Instruments and controls - Nissan Rogue Owner's ManualNissan Rogue: Instrument brightness control

The instrument brightness control operates

The instrument brightness control operates when the headlight switch is in the position. or position. position.

Turn the control A to adjust the brightness of the meter panel and the instrument panel lights.

The brightness indicator B will be shown briefly in the vehicle information display when the control is turned.

When the brightness level reaches the maximum or minimum, a beep will sound.

When the brightness level reaches the minimum, the meter panel and the instrument panel lights will be turned off.

After the ignition switch is turned to the OFF position, the brightness indicator B is displayed for 30 seconds.

    Fuel gauge
    The gauge A indicates the approximate fuel level in the tank. The gauge may move slightly during braking, turning, acceleration, or going up or down hills. Refill the fuel tank before the gaug ...

    Compass (if so equipped)
    When the ignition switch is turned to the ON position, the compass display B will indicate the direction of the vehicle’s heading. If the display reads “C”, calibrate the compass by d ...

    See also:

    CD/DVD functions
    Center console control panel 1 Disc slot 2 MEDIA button 3 Eject 4 Number keys 5 TUNE:Turn to navigate among menu selections/folders/tracks. 6 OK/MENU: Press to confirm your selection or ac ...

    TIME Button (Auxiliary Mode)
    Press this button to change the display to time of day. The time of day will display for five seconds (when the ignition is OFF). ...

    Stowing the flat tire
    1 Remove any dirt or foreign matter from the disc wheel seat and the wheel contact surface. Vehicles with aluminum wheels and a steel wheel for the spare: Remove the plastic rings from the wh ...