Nissan Rogue: Compass (if so equipped)
When the ignition switch is turned to the ON position, the compass display B will indicate the direction of the vehicle’s heading.
If the display reads “C”, calibrate the compass by driving the vehicle in 3 complete circles at less than 5 MPH (8 km/h). You can also calibrate the compass by driving your vehicle on your everyday route. The compass will be calibrated once it has tracked 3 complete circles.
To turn on and off the compass manually, push
the 
switch
A while the ignition switch is in
the ON position.
Instrument brightness control
The instrument brightness control operates
when the headlight switch is in the or
position.
Turn the control A to adjust the brightness of
the meter panel and the instrument panel lights.
...
Zone variation change procedure
Zone map
The difference between magnetic north and
geographical north is known as variance. In
some areas, this difference can sometimes be
great enough to cause false compass readings.
Foll ...
See also:
Overview of Contents
Contents
A convenient reference to the
sections in this manual.
Your Vehicle at a Glance
A quick reference to the main
controls in your vehicle.
Driver and Passenger Safety
Important informat ...
Traction Control System (TCS)/StabiliTrak® Light
The StabiliTrak system or the Traction Control System (TCS) indicator/warning
light comes on briefly when the engine is started. If the light does not come on,
have the vehicle serviced by your ...
Global Positioning System (GPS)
○ Obstruction of the GPS can occur in a large city with tall buildings; in parking
garages; around airports; in tunnels, underpasses, or parking garages; or in an
area with very dense trees. ...
