Volvo XC60: Function
Function overview
1 Visual warning signal, collision risk
2 Radar sensor
3 Camera
Introduction
Collision Warning with Full Auto-brake and Pedestrian Detection is designed to assist the driver if there is a risk of a collision with a pedestrian, a vehicle ahead that is at a standstill or ...Collision Warning
The radar sensor and the camera work together to detect a pedestrian, stationary vehicles and vehicles that are moving in the same direction as your vehicle. If there is a risk of collision wi ...See also:
What is an Onboard Diagnostic System (OBD II)?
OBD II is part of your vehicle's computerized
engine management system. It stores diagnostic
information about your vehicle's emission
controls. It can light the Check Engine light
(MIL) if it ...
Transporting the vehicle
The towing eyes or trailer tow hitch can be used to pull the vehicle onto a trailer
or transporter if you wish to transport it.
Turn the SmartKey to position 2 in the ignition lock.
Shift the ...
Brake lights and taillights
The brake lights and taillights are replaced from
inside the cargo area.
NOTE
Before starting to replace a bulb, see
page 322.
1. Open the panel.
2. Remove the bulb holder by turning it coun ...