Hyundai Tucson: Bi-level heating
Your Hyundai is equipped with bi-level heating
controls. To use this feature:
o Set the air intake control to the fresh air
(
) position.
o Set the air flow control at the bi-level (
)
position.
o Adjust the fan speed control to the desired
speed.
o Set the temperature control between "Cool"
and "Warm".
Heating controls
For normal heating operation, set the air intake
control to the fresh air () position and
the
air flow control to the floor ()
position.
For faster heating, the air intake control should
...
Ventilation
To operate the ventilation system:
o Set the air intake control to "Fresh" mode
().
o To direct all intake air to the dashboard
vents, set the airflow control to "Face" ( ...
See also:
Combination meter illumination
When the ignition switch is turned to the
“ON” position, the various parts of the
combination meter are illuminated in the
following sequence:
1. Warning lights, indicator lights, meter
...
Cleaning the paintwork
Scratches, corrosive deposits, areas affected by corrosion and damage caused
by inadequate care cannot always be completely repaired. In such cases, visit a
qualified specialist workshop, e.g. an ...
Lap/Shoulder Belt Operating Instructions
1. Enter the vehicle and close the door. Sit back and
adjust the seat.
2. The seat belt latch plate is located on the B-Pillar along
the outboard side and rear of the seat cushion. The rear
sea ...
