Hyundai Tucson: Heating controls
For normal heating operation, set the air intake control to the fresh air () position and the air flow control to the floor () position. For faster heating, the air intake control should be set in the recirculate () position. If the windows fog up, set the air flow control to the defrost () position. (The A/C will be on automatically and "Fresh" mode will be activated.) For maximum heat, rotate the temperature control to "Warm".
Heating and ventilation
There are three controls and two switches for the heating and cooling system. They are: 1. Air flow control. 2. Fan speed control. 3. Temperature control. 4. Air intake control switch. 5 ...Bi-level heating
Your Hyundai is equipped with bi-level heating controls. To use this feature: o Set the air intake control to the fresh air () position. o Set the air flow control at the bi-level () posit ...See also:
Passenger compartment fuse panel
The fuse panel is located on the
right-hand side of the center
console, by the instrument panel.
Remove the panel cover to access
the fuse cover. Press the tabs on the
top and bottom of the fus ...
Sitting in the correct position
The driver
and front seat passenger
must not ride with the seat fully
reclined.
Do not adjust
the seat while the
vehicle is moving.
The seat, head restraint, seat belt and airbags,
all con ...
Important safety notes
A license agreement must exist in order to activate the mbrace service. Ensure
that your system is activated and ready for use, and press the
MB Info call button to register. If
any of the st ...