Volvo XC60: Extra high beam - Replacing bulbs - Maintenance and specifications - Volvo XC60 Owner's ManualVolvo XC60: Extra high beam

1. Remove the headlight housing from the

1. Remove the headlight housing from the vehicle (see page 322).

2. Remove the cover over the bulbs (see page 323).

3. Disconnect the wiring connector from the bulb holder.

4. Remove the bulb holder from the headlight housing by pulling it straight out.

5. Insert a new bulb in the holder until it snaps in place. It can only be inserted in one way.

6. Press the bulb holder into position in the headlight housing.

7. Reconnect the wiring connector to the bulb holder.

8. Put the cover back into position and reinstall the headlight housing.

    High beam, Halogen
    1. Remove the headlight housing from the vehicle (see page 322). 2. Remove the cover over the bulbs (see page 323). 3. Remove the bulb by turning it counterclockwise and pulling it straight ...

    Turn signals
    1. Remove the headlight housing from the vehicle (see page 322). 2. Remove the bulb holder by turning it counterclockwise and pulling it out of the headlight housing. 3. Pull out the holder ...

    See also:

    To Unlock The Doors And Liftgate
    Press and release the UNLOCK button on the RKE transmitter once to unlock the driver’s door or twice to unlock all doors and the liftgate. The turn signal lights will flash to acknowledge the ...

    Selecting picture
    1. Select the “Picture Select” menu by operating the “TUNE/TRACK/CH” dial. For details, refer to “Audio settings (type D audio)”. If no pictures are saved, “No Data” is display ...

    Recommended Fuel
    Use regular unleaded gasoline with a posted octane rating of 87 or higher. If the octane rating is less than 87, an audible knocking noise, commonly referred to as spark knock, might be heard when ...