Jeep Liberty: Headlamp Off Delay - Personal Settings (Customer-Programmable Features) - Electronic Vehicle Information Center (EVIC) — If Equipped - Understanding Your Instrument Panel - Jeep Liberty Owner's ManualJeep Liberty: Headlamp Off Delay

When this feature is selected, the driver can choose to have the headlights remain on for 0, 30, 60, or 90 seconds when exiting the vehicle. To make your selection, press and release the SELECT button until “0,” “30,” “60,” or “90” appears.

    Flash Lamp With Lock
    When on is selected, the front and rear turn signals will flash when the doors are locked or unlocked with the RKE transmitter. This feature may be selected with or without the Sound Horn with L ...

    Headlamps With Wipers (Available with Auto Headlights Only)
    When on is selected, and the headlight switch is in the AUTO position, the headlights will turn on approximately 10 seconds after the wipers are turned on. If the headlights were turned on by th ...

    See also:

    Side ventilators
    Side ventilators 1) Open 2) Close 3) Thumb-wheel Move the tab to adjust the flow direction. To open or close the ventilator, turn the thumb-wheel up or down. ...

    Trailer Towing
    You can use your SUZUKI to tow a trailer, but you should always observe the requirements and recommendations in this section. If you intend to tow a trailer, it is essential to select a trailer an ...

    Shift Lever Position Indicators
    These indicators on the instrument panel show which position the shift lever is in. The ‘‘D’’ indicator comes on for a few seconds when you turn the ignition switch to the ON (II) ...