Mercedes-Benz GLK-Class: Automatic transmission - Pulling away - Driving - Driving and parking - Mercedes-Benz GLK-Class Owner's ManualMercedes-Benz GLK-Class: Automatic transmission

WARNING WARNING

It is dangerous to shift the automatic transmission out of parking position P or neutral position N if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in reverse. You could lose control of the vehicle and hit someone or something. Only shift into gear when the engine is idling normally and when your right foot is firmly on the brake pedal.

position if you depress the brake pedal. Only then is the selector lever lock released. It is only possible to shift the transmission from position P to the desired position if you depress the brake pedal. Only then is the selector lever lock released.

  • Depress the brake pedal and keep it depressed.
  • Shift the transmission to position D or R.
  • Release the parking brake ().
  • Release the brake pedal.
  • Carefully depress the accelerator pedal.

multifunction display, the parking brake is still applied. Release the parking brake. If a warning tone sounds and the Release Park. Brake message appears in the multifunction display, the parking brake is still applied. Release the parking brake.

the doors drop down. The vehicle locks centrally once you have pulled away. The locking knobs in the doors drop down.
You can open the doors from the inside at any time.
You can also deactivate the automatic locking feature ().

the catalytic converter to reach its operating temperature more quickly. Upshifts take place at higher engine speeds after a cold start. This helps the catalytic converter to reach its operating temperature more quickly.

    Hill start assist
    Hill start assist helps you when pulling away forwards or in reverse on an uphill gradient. It holds the vehicle for a short time after you have removed your foot from the brake pedal. This gives ...

    See also:

    Using the Bluetooth® audio/phone
    1 Bluetooth® connection condition If “BT” is not displayed, the Bluetooth® audio/phone cannot be used. 2 Display A message, name, number, etc. is displayed. Lower-case characters and s ...

    Checking and replacing fuses
    Replacing a Fusible Link A fusible link will melt if the electrical circuits from the battery are ever overloaded, thus preventing damage to the entire wiring harness. (This could be caused ...

    Meters and gauges
    Meters and gauges 1. Tachometer 2. Vehicle information display 3. Speedometer 4. Warning/indicator lights 5. Engine coolant temperature gauge 6. switch (twin trip odometer control and ...