GMC Terrain: Flash-to-Pass - Exterior Lighting - Lighting - GMC Terrain Owner's ManualGMC Terrain: Flash-to-Pass

The flash&-to&-pass feature works with the low beams or Daytime Running Lamps (DRL) on or off.

To flash the high beams, pull the turn signal/lane change lever all the way toward you, then release it.

    Headlamp High/Low-Beam Changer
    Headlamp High/Low&-Beam Changer: Push the turn signal/lane change lever away from you and release, to turn the high beams on. To return to low beams, push the lever again or pull it toward yo ...

    Daytime Running Lamps (DRL)
    Daytime Running Lamps (DRL) system makes the low-beam headlamps come on at a reduced brightness in daylight when the following conditions are met: ○ The ignition is on. ○ The exterior ...

    See also:

    Engine block heater
    The engine block heater warms the engine, and permits quicker starts in cold weather. Connect the cord to a standard 110-115 Volt AC electrical outlet with a grounded three-wire extension cord. ...

    Changing a wheel
    1. Apply the parking brake and put the gear selector in P. 2. Take out the jack*, lug wrench*, the towing eyelet and the wheel cover removal tool* stowed under the floor of the trunk. 3. Remov ...

    Audio System Lighting
    You can use the instrument panel brightness control knob to adjust the illumination of the audio system. The audio system illuminates when the parking lights are on, even if the system is tu ...