Mercedes-Benz GLK-Class: Fastening seat belts - Seat belts - Occupant safety - Safety - Mercedes-Benz GLK-Class Owner's ManualMercedes-Benz GLK-Class: Fastening seat belts

WARNING WARNING

According to accident statistics, children are safer when properly restrained on the rear seats than on the front-passenger seat. Thus, we strongly recommend that children be placed in the rear seat whenever possible. Regardless of seating position, children 12 years old and under must be seated and properly secured in an appropriately sized child restraint system or booster seat recommended for the size and weight of the child. For additional information, see the "Children in the vehicle" section.

A child's risk of serious or fatal injuries is significantly increased if the child restraints are not properly secured in the vehicle and/ or the child is not properly secured in the child restraint.

  • Adjust the seat and move the backrest to an almost vertical position ().
  • Pull the seat belt smoothly through belt sash guide 1.
  • Without twisting it, guide the shoulder section of the seat belt across the middle of your shoulder and the lap section across your hips.
  • Engage belt tongue 2 in buckle 3.
  • If necessary, adjust the seat belt to the appropriate height ().
  • If necessary, pull upwards on the shoulder section of the seat belt to tighten the belt across your body.

All seat belts except the driver's seat belt are equipped with a special seat belt retractor to securely fasten child restraint systems in the vehicle. For further information on special seat belt retractors, see ().

For more information about releasing the seat belt with release button 4, see "Releasing seat belts" ().

    Correct use of the seat belts
    WARNING USE SEAT BELTS PROPERLY Seat belts can only work when used properly. Never wear seat belts in any other way than as described in this section, as that could result in serious i ...

    Belt height adjustment
    You can adjust the seat belt height on the driver's seat and the front-passenger seat. Adjust the height so that the upper part of the seat belt is routed across the center of your shoulder ...

    See also:

    Starting the Engine Using Remote Start
    To start the engine using the remote start feature: 1. Press and release on the RKE transmitter. 2. Press and hold for about two seconds. The turn signal lamps will briefly flash to confirm th ...

    Releasing the parking lock manually
    In the event of an electrical malfunction, it is possible to release the selector lever lock manually to move it out of position P, e.g. if you wish to tow the vehicle away. Do not use any s ...

    Setting a speed
    Once ACC has been put in standby mode, use the or buttons to store (set) the vehicle's current speed. This puts the system in active mode. The set speed, for example 55 mph, is shown in th ...