Mercedes-Benz GLK-Class: Checking tire pressure electronically - Tire pressure monitor (USA only) - Tire pressure - Wheels and tires - Mercedes-Benz GLK-Class Owner's ManualMercedes-Benz GLK-Class: Checking tire pressure electronically

  • Make sure that the SmartKey is in position 2 () in the ignition lock.
  • Press the button on the steering wheel to or select the Service menu. button on the steering wheel to select the Service menu.
  • Press the button to select Tire Pressure. or Press the  button. The current button to select Tire Pressure.
  • Press the tire pressure for each wheel will be displayed in the multifunction display. button. The current tire pressure for each wheel will be displayed in the multifunction display.

If the vehicle has been parked for longer than 20 minutes, the Tire pressures will be displayed after driving a few minutes message appears in the display.

After a teach-in period, the tire pressure monitor automatically recognizes new wheels or new sensors. If a clear allocation of the tire pressure values to the individual wheels is not possible, the Tire Pressure Monitor Active message is shown instead of the tire pressure display. The tire pressures are already being monitored.

to show the tire pressure of the wheel that has been removed for a few minutes. If a spare wheel/emergency spare wheel is mounted, the system may continue to show the tire pressure of the wheel that has been removed for a few minutes. If this occurs, note that the value displayed for the position where the spare tire is mounted is not the same as the spare wheel/emergency spare wheel's current tire pressure.

    Important safety notes
    If a tire pressure monitor system is installed, the vehicle's wheels have sensors that monitor the tire pressures in all four tires. The tire pressure monitor warns you when the pressure drops ...

    Tire pressure monitor warning messages
    If the tire pressure monitor detects a significant pressure loss on one or more tires, a warning message is shown in the multifunction display. A warning tone also sounds and the tire pressure war ...

    See also:

    System fault
    If a system fault is detected, a continuous tone will sound and a message will be displayed in the message centre. Contact your Dealer/ Authorised Repairer as soon as possible. ...

    How can I prepare for my next OBD II emission inspection?
    • If your Check Engine (MIL) light is lit – or was lit but went out without service, have your vehicle diagnosed and, if necessary, serviced by a qualified Volvo technician. • If you rece ...

    Manual command selection
    Commands can be selected manually. While the commands are displayed on the audio screen, select a command by operating the audio tuning switch, and then push the switch. Once a command is m ...