Mitsubishi Outlander: Washer fluid - Maintenance - Mitsubishi Outlander Owner's ManualMitsubishi Outlander: Washer fluid

Open the washer fluid reservoir cap and check the level of washer fluid with

Open the washer fluid reservoir cap and check the level of washer fluid with the dipstick. If the level is low, replenish the container with washer fluid.

NOTE:
● The washer fluid container serves the windscreen, rear window and headlamps.

During cold weather

To ensure proper operation of the washers at low temperatures, use a fluid containing an anti-freezing agent.

    Engine coolant
    To check the coolant level A transparent coolant reserve tank (A) is located in the engine compartment. The coolant level in this tank should be kept between the “LOW” and “FULL” marks ...

    Brake fluid/Clutch fluid
    The brake fluid and the clutch fluid share reservoir tank. To check the fluid level The fluid level must be between the “MAX” and “MIN” marks on the reservoir. The fluid level is monitor ...

    See also:

    Air distribution
    The incoming air is distributed from a number of different vents in the passenger compartment. Air distribution is fully automatic in AUTO mode. If desired, air distribution can be controlled ...

    Operation
    Chassis settings Use the buttons in the center console to change setting. The setting in use when the engine is switched off is activated the next time the engine is started. ...

    Emergency Assistance
    If you are in an emergency and the mobile phone is reachable: • Pick up the phone and manually dial the emergency number for your area. If the phone is not reachable and the Uconnect™ Phone ...