Volvo XC60: Using the information button
1. Press the information button .
2. All of the indicator lights will flash sequentially for approximately 7 seconds to indicate that the PCC is receiving information from the vehicle. If any of the buttons are pressed during this 7-second period, transmission of information to the PCC will be interrupted.
NOTE
If none of the indicator lights flash when the
information button has been pressed several
times from different places in relation to
the vehicle, contact an authorized Volvo
service technician.
The indicator lights provide information according to the illustration:
1 Steady green light: the vehicle is correctly locked.
2 Steady yellow light: the vehicle is not locked.
3 Steady red light: the alarm has been triggered.
4 Both red lights flash alternatively: the alarm was triggered less than 5 minutes ago.
Unique functions—PCC
1 Information button 2 Indicator lights Pressing the information button provides certain information about the vehicle with the help of the indicator lights. ...Range
The PCC's lock and unlock functions have a range of approximately 60 ft. (20 m) from the vehicle. NOTE • The approach lighting, panic alarm, and the functions controlled by the information ...See also:
Replacing the battery
- Do not let dust, oil or water get on
or in the transmitter when replacing
the battery.
- Be careful not to damage the
printed circuit board in the transmitter
when replacing the battery ...
Remote Keyless Entry (RKE) System
The Remote Keyless Entry (RKE) transmitter will work up to 60m(195 ft) away from
the vehicle.
Press this button to extend the key. The key can be used for the ignition and
all locks.
: Press ...
Sport mode
The transmission will stay in the lower gears
for longer, improving mid-range performance.
To deselect Sport mode, move the selector
back to D. ...