Jeep Liberty: Using Operator Mode
Press the switch rearward and hold it, the Sky Sliderâ„¢ will open from the front and move toward the rear of the vehicle.
Press the switch forward and hold it, the Sky Sliderâ„¢ will open from the rear and move toward the front of the vehicle.
NOTE: During operation, any movement of the Sky Sliderâ„¢ switch will stop the Sky Sliderâ„¢ roof.
Using Automatic Mode
Press the switch rearward and release it within one-half second and the Sky Sliderâ„¢ will open from the front and move automatically toward the rear of the vehicle. Press the switch forward and ...See also:
Tilt position
Tilt position, raised at the rear edge
1 Open (raise the rear edge of the front glass
section) by pressing the rear edge of the
control upward.
2 Close by pulling the rear edge of the control ...
Conserving electrical current
Keep the following in mind to help minimize
battery drain:
• When the engine is not running, avoid
using ignition mode II. Many electrical systems
(the audio system, the optional navigation
...
Checking the transaxle fluid (automatic)
Transaxle fluid in the automatic transaxle should
be checked at those intervals specified in the
vehicle maintenance schedule in Section 5.
NOTE:
Automatic transaxle fluid is basically red
co ...