Volvo XC60: Turn signals
Turn signals
When changing lanes
1 The driver can automatically flash the turn signals 3 times by moving the turn signal lever up or down to the first position and releasing it.
When turning
2 Move the lever as far up or down as possible to start the turn signals. The turn signals will be cancelled automatically by the movement of the steering wheel, or the lever can be returned to its initial position by hand.
NOTE
• This automatic flashing sequence can
be interrupted by immediately moving
the lever in the opposite direction.
• If the turn signal indicator flashes faster
than normal, check for a burned-out
turn signal bulb.
Hazard warning flashers
Location of the hazard warning flasher button The hazard warning flasher should be used to indicate that the vehicle has become a traffic hazard. To activate the flashers, press the button i ...Interior lighting, front
Light switches, front roof lighting 1 Drivers side front reading light, on/off. 2 Passenger's side front reading light, on/off. 3 Overhead courtesy lighting. The lighting in the front part of th ...See also:
Instrument Panel Brightness
You can change the instrument panel
brightness only when the light
switch is on.
Turn the knob on the lower part of
the instrument panel to adjust the
brightness.
You will hear a beep wh ...
Manual connection
To connect a phone other than the one that
was most recently connected or to switch
between cell phones that are already paired
with the hands-free system, go to Phone
menu
Change phone. ...
Sound stage
The sound experience can be optimized for the
driver's seat, both front seats or the rear seat.
If the front and rear seats are occupied, the
sound stage setting Front seats is recommended.
Sele ...