Mercedes-Benz GLK-Class: Releasing the parking lock manually
In the event of an electrical malfunction, it is possible to release the selector lever lock manually to move it out of position P, e.g. if you wish to tow the vehicle away.
Do not use any sharp-edged objects to remove the selector lever gaiter from
the center console. This could damage the selector lever gaiter.
- Apply the parking brake.
- Pry off selector lever gaiter : with a flat, blunt object, (e.g. a screwdriver wrapped in cloth) from the right-hand edge, pulling it up and out.
- Press release buttons ; down and simultaneously move the selector lever out of position P.
The selector lever can now be moved freely until it is returned to position P.
Restricting the shift range
X Press the selector lever to the left towards D–.
The automatic transmission shifts down one gear and restricts the shift range
to the relevant gear.
If the engine exceeds the maximum engine ...
Transfer case
This section is only valid for vehicles with 4- wheel drive (4MATIC). Power is
always transmitted to both axles.
Performance tests may only be carried out on a 2-axle dynamometer. The brake
sy ...
See also:
Windshield wiper and washer switch
In freezing temperatures the washer
solution may freeze on the windshield
and obscure your vision which may lead
to an accident. Warm windshield with
the defroster before you wash the
wi ...
Type D audio
Push the “TEXT” button to show the next
page when the text is not fully displayed
while the PSD (Program Service Data) or
RT (Radio Text) service is received.
NOTE
- When the HD Radio fun ...
ON position
When the switch is in the ON position 1 , the
ceiling light will illuminate. ...
