Nissan Rogue: To protect your vehicle from corrosion - Corrosion protection - Appearance and care - Nissan Rogue Owner's ManualNissan Rogue: To protect your vehicle from corrosion

- Wash and wax your vehicle often to keep the vehicle clean.

- Always check for minor damage to the paint and repair it as soon as possible.

- Keep drain holes at the bottom of the doors open to avoid water accumulation.

- Check the underbody for accumulation of sand, dirt or salt. If present, wash with water as soon as possible.

- NEVER remove dirt, sand or other

- NEVER remove dirt, sand or other debris from the passenger compartment by washing it out with a hose.

Remove dirt with a vacuum cleaner.

- Never allow water or other liquids to come in contact with electronic components inside the vehicle as this may damage them.

Chemicals used for road surface deicing are extremely corrosive. They accelerate corrosion and deterioration of underbody components such as the exhaust system, fuel and brake lines, brake cables, floor pan and fenders.

In winter, the underbody must be cleaned periodically.

For additional protection against rust and corrosion, which may be required in some areas, consult a NISSAN dealer.

    Air pollution
    Industrial pollution, the presence of salt in the air in coastal areas, or heavy road salt use will accelerate the corrosion process. Road salt will also accelerate the disintegration of paint ...

    See also:

    Security setting - Setting PIN code
    The PIN code is a 4-digit number and is used when locking the phonebook. 1. Select the “SET PIN” menu. Then “CURRENT PIN?” is displayed. 2. Input the current PIN code by operating the ...

    Cargo tie-down rings
    Observe the following notes on securing loads: secure the load using the cargo tie down rings. do not use elastic straps or nets to secure a load, as these are only intended as an anti-slip p ...

    To increase the speed (by button)
    To increase the speed (by button) Push the “RES/ACC” button and hold it until the vehicle reaches the desired speed. Then, release the button. The vehicle speed at that moment will be ...