Subaru Forester: To install the cover housing
1. Remove the cover of the retainers by prying on the edge with a flat-head screwdriver.
2. Insert the projections located on the both ends of the sleeve into the recesses of the retainers.
To remove the cover
1. Rewind the cover.
2. Push the switch that is next to the right
end of the cover housing.
3. Take it off the retainer. ...
Cargo tie-down hooks
Cargo tie-down hooks
The cargo area is equipped with four tiedown
hooks so that cargo can be secured
with a cargo net or ropes.
When using the tie-down hooks, turn them
down out of the sto ...
See also:
Acc
In this position the electrical accessories
(radio, accessory power outlet, etc.) can
be used. ...
Spare Tire Stowage
The spare tire is stowed underneath the rear of the
vehicle and is held in place by a cable winch mechanism. ...
Tire dressing
NISSAN does not recommend the use of tire
dressings. Tire manufacturers apply a coating to
the tires to help reduce discoloration of the
rubber. If a tire dressing is applied to the tires, it
...
