Toyota RAV4: Taking out the jack
Disengage the claws and remove the cover.
1 Loosen
2 Tighten
Loosen and take out the jack.
If you have a flat tire (vehicles with standard tires)
Remove the flat tire and replace it with the spare provided. ■ Before jacking up the vehicle ● Stop the vehicle on a hard, flat surface. ● Set the parking brake. ● Shift th ...Taking out the tool bag
Disengage the claws and remove the cover. Take out the tool bag. ...See also:
Door Locks
To lock or unlock the vehicle from the outside, press
or
on the Remote Keyless Entry (RKE) transmitter.
There is a power door lock switch on the instrument panel.
There are power door lock s ...
Brake/Clutch fluid
Brake and clutch (if equipped) systems are supplied from the same
reservoir.
The fluid level will drop slowly as the
brakes wear, and will rise when the
brake components are replaced. Fluid
lev ...
Electronic speed control
When engaged, the Electronic Speed Control takes over
the accelerator operation at speeds greater than 25 mph
(40 km/h).
The Electronic Speed Control lever is located on the right
side of the s ...