Mercedes-Benz GLK-Class: Storing settings
With the memory function, you can store up to three different settings, e.g. for three different people.
The following settings are stored as a single memory preset:
- position of the seat, backrest and head restraint
- driver's side: steering wheel position
- driver's side: position of the exterior mirrors on the driver's and front-passenger sides
WARNING
Do not activate the memory function while driving. Activating the memory function while driving could cause the driver to lose control of the vehicle.
- Adjust the seat ().
- On the driver's side, adjust the steering wheel () and the exterior mirrors ().
- Press memory button M and one of the storage position buttons 1, 2 or
3 within three seconds.
The settings are stored in the selected preset position. A tone sounds when the settings have been completed.
Memory function
...Calling up a stored setting
If you want to move the seat from the fully reclined position to a stored seat position, first raise the backrest. The seat could otherwise be damaged. Press and hold the relevant storage positi ...See also:
Wiper blades
The windshield wiper blades are different
lengths. The blade on the driver’s side is longer
than the one on the passenger side.
Service position
Wiper blades in service position
The wiper b ...
Removing the collapsible spare wheel
The collapsible spare wheel can be found in the stowage well under the trunk
floor.
Lift the trunk floor up ().
Remove stowage well 1.
Turn retaining screw 2 counter-clockwise and remo ...
Setting the center air vents
Center air vent, left
Center air vent, right
Center vent thumbwheel, right
Center vent thumbwheel, left
To open/close: turn thumbwheels 3 and 4 up or down. ...