Subaru Forester: START
The engine is started in this position. The starter cranks the engine to start it. When the key is released (after the engine has started), the key automatically returns to the “ON” position.
Do not turn the ignition switch to the “START” position while the engine is running.
If your registered key fails to start the engine, pull out the key once (the security indicator light will blink), and then insert the key in the ignition switch and turn it to the “START” position and again try to start the engine.
NOTE
The engine may not start in the following
cases:
- The key grip is touching another key or a metallic key holder.
- The key is near another key that contains an immobilizer transponder.
- The key is near or touching another transmitter.
ON
This is the normal operating position after the engine is started. ...Key reminder chime
The reminder chime sounds when the driver’s door is opened and the ignition switch is in the “LOCK” or “Acc” position. The chime stops under the following conditions. - when the igni ...See also:
Operation
The seats can be adjusted for a short period
after unlocking the door with the remote control
without the key in the ignition slot. Seat
adjustment is normally made when the ignition
is on and ...
Break-in Period
Help assure your vehicle’s future
reliability and performance by paying
extra attention to how you drive
during the first 600 miles (1,000 km).
During this period:
Avoid full-throttle starts ...
When “CHECK DISC” is displayed
Press the eject button to unload the discs.
Check that the disc is not damaged or
scratched, and also check that the disc is
inserted correctly. This message may
appear when using some CD-RW di ...