Suzuki Grand Vitara: Spark Plugs - Inspection and Maintenance - Suzuki Grand Vitara Owner's ManualSuzuki Grand Vitara: Spark Plugs

Spark Plugs
Spark Plugs

You should inspect spark plugs periodically for carbon deposits. When carbon
Spark Plugs

You should inspect spark plugs periodically for carbon deposits. When carbon accumulates on a spark plug, a strong spark may not be produced. Remove carbon deposits with a wire or pin and adjust the spark plug gap. To access the spark plugs: 1) Remove the engine cover. 2) Disconnect the coupler (1) while pushing the release lever. 3) Remove the bolt. 4) Pull the ignition coil out.

CAUTION: When replacing spark plugs, you should use the brand and type specified

CAUTION: When replacing spark plugs, you should use the brand and type specified for your vehicle. For the specified plugs, refer to the “SPECIFICATIONS” section at the end of this book. If you wish to use a brand of spark plug other than the specified plugs, consult your SUZUKI dealer.

    Air Cleaner
    Air Cleaner If the air cleaner is clogged with dust, there will be greater intake resistance, resulting in decreased power output and increased fuel consumption. Check and clean periodically acc ...

    Brakes
    Brake Fluid Check the brake fluid level by looking at the reservoir in the engine compartment. Check that the fluid level is between the “MAX” and “MIN” lines. If the brake fluid level i ...

    See also:

    Global Positioning System (GPS)
    ○ Obstruction of the GPS can occur in a large city with tall buildings; in parking garages; around airports; in tunnels, underpasses, or parking garages; or in an area with very dense trees. ...

    Connecting a trailer
    1. Remove the receiver cover from the hitch receiver tube. Then insert the ball mount into the hitch receiver tube. 2. Insert the hitch pin into the hole on the hitch receiver tube so that ...

    Second center seat belt
    The second center seat belt is a 3-point type restraint with 2 buckles. Both seat belt buckles must be correctly located and securely latched for proper operation. Make sure that the buckle 1 is ...