Volvo XC60: Shiftlock override
If the vehicle cannot be driven, for example because of a dead battery, the gear selector must be moved from the P position before the vehicle can be moved.
1 Lift away the rubber mat on the floor of the storage compartment behind the center console to expose the small opening for overriding the shiftlock system.
2 Insert the key blade into the opening. Press the key blade down as far as possible and keep it held down. Move the gear selector from the P position. For information on the key blade, see page 61.
Geartronic–manual shifting
Geartronic allows you to manually shift among your vehicle's six forward speeds. Geartronic can be selected at any time. • To access the manual shifting position from Drive (D), move the gear ...All Wheel Drive – AWD
Your Volvo can be equipped with permanent All Wheel Drive, which means that power is distributed automatically between the front and rear wheels. Under normal driving conditions, most of the ...See also:
Setting passkey
1. Select the “SET PASSKEY” menu.
After the currently set passkey is displayed,
a new passkey can be entered.
2. Input the new passkey by operating
the “TUNE/TRACK/CH” dial.
3. Select t ...
SUBARU advanced frontal airbag system
Your vehicle is equipped with a SUBARU
advanced frontal airbag system that complies
with the new advanced frontal airbag
requirements in the amended Federal
Motor Vehicle Safety Standard (FMVS ...
Unlocking the doors with the detached key blade
Insert the key blade as far as possible in the
driver's door lock. Turn the key blade clockwise
approximately one-quarter turn to unlock
the driver's door only.
NOTE
After unlocking the driver ...