Volvo XC60: Setting a warning distance - Operation - Collision warning with Full Auto-brake and Pedestrian Detection - Comfort and driving pleasure - Volvo XC60 Owner's ManualVolvo XC60: Setting a warning distance

This setting determines the distance at which the visual and audible warnings are triggered.

Select Long, Normal or Short by pressing MY CAR on the center console control panel and going to Settings Car settings Car settings Driver Driver support systems Collision Warning Collision Warning Warning distance. Warning distance.

The warning distance determines the level of sensitivity used by the system. The warning distance Long provides an earlier warning.

Begin by using Long and if the system gives too many warnings, try changing to Normal.

WARNING
• The setting Short should only be used in situations where traffic is light and moving at low speeds.
• Collision Warning alerts the driver to the risk of a collision but this function cannot reduce the driver’s reaction time.
• For Collision Warning to be as effective as possible, it is recommended that Distance Alert be set to 4 or 5, see page 164.

NOTE
• When Adaptive Cruise Control is used, the warning light and signal will be used by that function, even if the warnings provided by Collision Warning have been deactivated by the driver.
• In situations where traffic is moving at considerably different speeds, or if the vehicle ahead brakes suddenly, warnings may be considered to be late, even if the setting Long has been selected.

    Activating/deactivating warning signals
    The collision warning system’s visual signals are activated automatically when the engine is started if the collision warning system is switched on. The audible warning signal can be activate ...

    Checking settings
    The current Collision Warning settings can be checked by pressing MY CAR on the center console control panel and going to Settings Car settings Driver support systems Collision Warnin ...

    See also:

    System monitors
    A diagnostic system continually monitors the readiness of the seatbelt pretensioner while the vehicle is being driven. The seatbelt pretensioners share the control module with the SRS airbag s ...

    Reduced alarm function
    Turning off the accessory alarm sensors In certain situations it may be desirable to turn off the accessory inclination and movement alarm sensors if, for example, you drive your vehicle onto a ...

    Important safety notes
    The HomeLink® garage door opener integrated in the rear-view mirror allows you to operate up to three different door and gate systems. Certain garage door drives are incompatible with the integ ...