Nissan Rogue: Self-test feature
The ABS includes electronic sensors, electric pumps, hydraulic solenoids and a computer. The computer has a built-in diagnostic feature that tests the system each time you start the engine and move the vehicle at a low speed in forward or reverse. When the self-test occurs, you may hear a “clunk” noise and/or feel a pulsation in the brake pedal. This is normal and does not indicate a malfunction. If the computer senses a malfunction, it switches the ABS off and illuminates the ABS warning light on the instrument panel. The brake system then operates normally, but without anti-lock assistance.
If the ABS warning light illuminates during the self-test or while driving, have the vehicle checked by a NISSAN dealer.
Using the system
Depress the brake pedal and hold it down. Depress the brake pedal with firm steady pressure, but do not pump the brakes. The ABS will operate to prevent the wheels from locking up. Steer the ve ...Normal operation
The ABS operates at speeds above 3 to 6 MPH (5 to 10 km/h). The speed varies according to road conditions. When the ABS senses that one or more wheels are close to locking up, the actuator rapi ...See also:
XM™ Satellite Radio Service
XM Satellite Radio Service gives digital radio reception from coast to coast
in the 48 contiguous United States, and in Canada. Just as with FM, tall buildings
or hills can interfere with satellit ...
Important safety notes
While the vehicle is in motion, the tire pressure loss warning system monitors
the set tire pressure using the rotational speed of the wheels. This enables the
system to detect significant pressur ...
Towing a vehicle with both axles on the ground
When having your vehicle towed, observe the important safety notes ().
WARNING
The power assistance for the steering and the brake force booster do not work
when the engine is not running. Yo ...